Grout Haze Clean-Up – A safe and effective concentrated cleaner that is added to the grout cleanup water for removal of cementitious grout haze and latex additive film from tile during the grout cleanup process. It may also be used full-strength to remove light grout residue within the first 10 days after grouting.

Contact to buy

Health Precautions

MAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Wear skin and eye protection. Contains EDTA acid, sodium
tripolyphosphate, trisodium citrate dihydrate, and Beta-Alanine, N -(2- carboxyethyl)-N-(2-ethylhexyl)-monosodium salt. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting, seek medical attention

Limitations to the Product

Do not allow product to come in contact with any non-recommended surface
Do not use on polished marble or any other acid-sensitive tile or stone
Do not use excessive amounts of water during cleanup process as grout pigment may be washed out

Application of Product

DURING GROUT CLEANUP:
Read entire label before using. Perform grout cleanup per grout manufacturer’s instructions. During final grout cleanup rinse, mix a minimum of 3 oz (90 mL) of Grout Haze Clean-Up per gallon (3.8 L) of water. Wet a grout sponge or terry cloth towel with the cleaning solution, wring out excess liquid. Wipe diagonally across the tile.
Repeat steps 4 and 5 every 10 to 15 ft (.9 M to 1.3 M) or as necessary. Remove residual cleaning solution using a clean grout sponge or terry cloth towel dampened with clean water only.
AFTER GROUT CLEANUP WITHIN 10 DAYS OF GROUTING:
Use full strength if grout haze was not completely removed during grout cleanup. Apply directly to surface and agitate with white nylon scrub pad or brush. Allow product to dwell for 5 to 10 minutes for stubborn areas or heavier grout residue. Rinse with clean water to remove residual cleaning solution.

Cleaning of equipment

Clean tools and hands with water before material dries

Product Maintenance

Properly installed product requires no special maintenance.

Handling & Storage

Close container tightly after each use
Store in original container only
Store in and use in temperatures between 40° F 90°F (4° C 32°C)
Store in areas inaccessible to small children
Do not reuse empty container, wrap and discard in trash or recycle